المنتجات — ست عائلات، مورّد واحد

كل صفحة منتج تعطي المعيار والدرجة، نطاق المقاسات المتوفر من المخزون أو من إنتاجنا، نطاق سعر استرشادي بالدولار من قائمتنا الأسبوعية، الحد الأدنى للطلب، التغليف والمستندات المطلوبة لسوقكم. المنتجات التي نصنعها بأنفسنا مميزة.

الصاج المدرفل على الساخن

لفات وألواح ساخنة، صفائح إنشائية وسميكة، صاج بناء السفن، أوعية الضغط، مقاوم للتآكل، صاج مشبّر، كورتن.

لفائف وصاج مدرفل على الساخنلفائف وصاج وألواح مدرفلة على الساخن S235JR–S355JR، أسود أو مخلل ومزيّت (HRPO)، 1.5–20 مم، تُقص بالطول في إسطنبول.من المخزونHRPO pickled and oiled steel (EN)Hot-rolled pickled & oiled (HRP) coil and sheet 1.35–6.0 mm, S235JR / DD11 substrate, scale-free for forming and painting; from stock.من المخزونDD11 forming steel (EN)EN 10111 DD11 (1.0332, ex StW 22) — hot-rolled bending and forming sheet, 1.5–6 mm, black or pickled, from stock.من المخزونDD12 forming steel (EN)EN 10111 DD12 (1.0398, ex StW 23) — hot-rolled drawing-quality sheet, yield 170–320 MPa, A80 ≥ 30 %; 1.5–6 mm to order.من المخزونDD13 forming steel (EN)EN 10111 DD13 (1.0335, ex StW 24) — hot-rolled deep-drawing sheet, yield 170–310 MPa, A80 ≥ 33 %; 1.5–6 mm HRPO from stock.من المخزونDD14 forming steel (EN)EN 10111 DD14 (1.0389, ex StW 24 special) — hot-rolled extra-deep-drawing sheet, yield 170–290 MPa, A80 ≥ 36 %; 1.5–6 mm to order.من المخزونS235JR plate (EN)EN 10025-2 structural plate, 3–100 mm, cut to size.من المخزونST37 steel plate (EN)DIN 17100 ST37-2 — today certified as S235JR; 1.5–20 mm from stock.من المخزونS275JR plate (EN)EN 10025-2 structural plate for welded frames.من المخزونST44 steel plate (EN)DIN 17100 ST44-2 — certified as S275JR; 3–40 mm, the step between ST37 and ST52.من المخزونS355JR / J0 / J2 plate (EN)Higher-strength structural plate with impact-tested variants.من المخزونST52 steel plate (EN)DIN 17100 ST52-3 — certified as S355J2 (or S355JR); 3–100 mm, the high-strength standard.من المخزونS355JR steel plate (EN)EN 10025-2 S355JR (1.0045), 355 MPa, +20 °C impact; 6–20 mm stock.من المخزونS355J0 steel plate (EN)EN 10025-2 S355J0 (1.0553), 27 J at 0 °C — the ST52-3 U grade; 5–80 mm to order.من المخزونS355J2 steel plate (EN)EN 10025-2 S355J2 (1.0577), −20 °C impact, fully killed — the ST52-3 N grade; 6–30 mm stock, 3–150 mm to order.من المخزونS355J2+N steel plate (EN)S355J2 delivered normalised — fine grain, uniform through thickness; 8–150 mm to order.من المخزونS355K2 steel plate (EN)EN 10025-2 S355K2 (1.0596), 40 J at −20 °C — for dynamic loads and cold regions; 8–100 mm to order.من المخزونS355NL steel plate (EN)EN 10025-3 S355NL (1.0546) — normalised fine-grain plate, 27 J at −50 °C; 8–100 mm imported to order.من المخزونS355ML steel plate (EN)EN 10025-4 S355ML (1.8834) — thermomechanical fine-grain plate, 27 J at −50 °C, low CEV; 6–80 mm to order.من المخزونS355MC steel (EN)EN 10149-2 S355MC (1.0976) — thermomechanical cold-forming coil and sheet, 2–12 mm.من المخزونS460MC steel (EN)EN 10149-2 S460MC (1.0982) — 460 MPa cold-forming strip, 2–12 mm to order.من المخزونS500MC steel (EN)EN 10149-2 S500MC (1.0984) — 500 MPa cold-forming strip for tippers, booms and chassis, 2–12 mm.من المخزونS700MC steel (EN)EN 10149-2 S700MC (1.8974) — 700 MPa ultra-high-strength cold-forming strip, 3–12 mm.من المخزونWear-resistant plate AR400–AR500 (EN)Abrasion-resistant and S690QL high-yield plate.من المخزونAR400 wear plate (EN)400 HB abrasion-resistant plate 6–40 mm — the bendable, weldable all-rounder for buckets, chutes and liners.من المخزونAR450 wear plate (EN)450 HB abrasion-resistant plate 6–30 mm — more wear life than AR400, still formable; the tipper-body grade.من المخزونAR500 wear plate (EN)500 HB abrasion-resistant plate 6–40 mm for liners and fixed wear parts under severe sliding abrasion.من المخزونS690QL steel plate (EN)EN 10025-6 quenched and tempered high-strength structural plate, 690 MPa yield, 6–60 mm, −40 °C impact.من المخزونHeavy plate & slab (EN)20–200 mm plate for machinery and shipbuilding bases.من المخزونShipbuilding plate Grade A–AH36 (EN)Class-approved hull plate.من المخزونGrade A ship plate (EN)Ordinary-strength shipbuilding plate, 235 MPa yield, class-certified (LR, BV, DNV, ABS, RINA, TL), 5–50 mm.من المخزونGrade B ship plate (EN)Ordinary-strength hull plate with 27 J impact at 0 °C, for thicker shell and deck plates; class-certified, 6–50 mm.من المخزونAH36 steel plate (EN)Higher-strength shipbuilding plate, 355 MPa yield, 34 J at 0 °C, class-certified, 6–60 mm.من المخزونDH36 steel plate (EN)Higher-strength hull plate, 355 MPa yield with 34 J at −20 °C, for thick and critical plates; class-certified, 8–80 mm.من المخزونEH36 steel plate (EN)Higher-strength hull plate, 355 MPa yield with 34 J at −40 °C, normalised or TM, for the most critical zones; 10–100 mm.من المخزونPressure vessel plate P235GH–P355GH, 16Mo3 (EN)EN 10028-2 boiler and vessel plate.من المخزونP235GH steel plate (EN)EN 10028-2 P235GH (1.0345) — low-pressure boiler and hot-water plate, 3–60 mm to order.من المخزونP265GH steel plate (EN)EN 10028-2 P265GH (1.0425) — the standard boiler and pressure-vessel plate; 6–20 mm limited stock, 3–100 mm to order.من المخزونP295GH steel plate (EN)EN 10028-2 P295GH (1.0481, ex 17Mn4) — 295 MPa pressure-vessel plate, 6–100 mm to order.من المخزونP355GH steel plate (EN)EN 10028-2 P355GH (1.0473, ex 19Mn6) — the strongest GH boiler plate; 6–150 mm to order.من المخزونP355NH steel plate (EN)EN 10028-3 P355NH (1.0565) — normalised fine-grain pressure-vessel plate, −20 °C; 6–100 mm to order.من المخزون16Mo3 steel plate (EN)EN 10028-2 16Mo3 (1.5415, ex 15Mo3) — 0.3 % Mo creep-resisting boiler plate to 500 °C; 6–100 mm imported to order.من المخزونASTM A516 Grade 70 plate (EN)ASME SA-516 Gr. 70 pressure-vessel plate for U-stamp projects; Gr. 60 / 65 also; 6–100 mm to order.من المخزونASTM A572 Grade 50 plate (EN)HSLA structural plate, 345 MPa (50 ksi) — the ASTM twin of S355; 6–100 mm to order.من المخزونASTM A36 steel plate (EN)The ASTM carbon structural plate, 250 MPa (36 ksi) — S235JR/S275JR equivalent; 6–100 mm to order.من المخزونCorten weathering steel S355J2WP (EN)EN 10025-5 weathering plate and sheet for façades and structures.من المخزونS355J2WP corten sheet (EN)EN 10025-5 phosphorus-alloyed weathering steel (Corten A class), 1–10 mm sheet for façades, art and landscaping.من المخزونS355J0WP corten sheet (EN)EN 10025-5 weathering steel with 0 °C impact — the economical Corten A grade for cladding, landscaping and art, 1–10 mm.من المخزونCheckered plate (EN)Tear-drop and five-bar floor plate, 3–12 mm.من المخزونPerforated & expanded metal (EN)Round, square and slotted perforations punched to order; expanded mesh.تصنيع في ديلوفاسي

المطلي والمدرفل على البارد

مجلفن بالغمس الساخن، مدهون مسبقاً، ألوزنك، زنك-مغنيسيوم، مدرفل بارد DC01–DC04، شرائح مقصوصة.

DC01 cold-rolled steel (EN)EN 10130 DC01 (1.0330) — the standard cold-rolled (DKP) sheet, 0.40–3.0 mm, from stock.من المخزونDC03 cold-rolled steel (EN)EN 10130 DC03 (1.0347) — drawing-quality cold-rolled sheet, yield ≤ 240 MPa, A80 ≥ 34 %, 0.50–3.0 mm to order.من المخزونDC04 cold-rolled steel (EN)EN 10130 DC04 (1.0338) — deep-drawing cold-rolled sheet, yield ≤ 210 MPa, A80 ≥ 38 %, r90 ≥ 1.6; 0.50–3.0 mm stock.من المخزونDC05 cold-rolled steel (EN)EN 10130 DC05 (1.0312) — extra-deep-drawing sheet, yield ≤ 180 MPa, A80 ≥ 40 %, r90 ≥ 1.9; 0.50–2.5 mm to order.من المخزونDC06 cold-rolled steel (EN)EN 10130 DC06 (1.0873) — interstitial-free super-deep-drawing sheet, r90 ≥ 2.1, no ageing; 0.50–2.0 mm to order.من المخزونصاج مجلفن ولفائف مجلفنة (GI)صاج GI ولفائف مجلفنة بالغمس الساخن DX51D، طلاء Z100–Z275، سماكة 0.30–4.00 مم من المخزون.من المخزونDX51D galvanized steel (EN)EN 10346 DX51D+Z — the standard hot-dip galvanized bending grade, 0.30–4.0 mm, Z100–Z275, from stock.من المخزونDX52D galvanized steel (EN)EN 10346 DX52D+Z — drawing grade with guaranteed yield 140–300 MPa, 0.40–3.0 mm to order.من المخزونDX53D galvanized steel (EN)EN 10346 DX53D+Z — deep-drawing grade, yield 140–260 MPa, A80 ≥ 30 %, 0.40–2.0 mm to order.من المخزونDX54D galvanized steel (EN)EN 10346 DX54D+Z — extra-deep-drawing grade, yield 120–220 MPa, A80 ≥ 36 %, r90 ≥ 1.6; 0.50–2.0 mm to order.من المخزونS220GD galvanized steel (EN)EN 10346 S220GD+Z — structural galvanized grade, yield ≥ 220 MPa, for light profiles; 0.40–3.0 mm to order.من المخزونS250GD galvanized steel (EN)EN 10346 S250GD+Z — structural galvanized strip, yield ≥ 250 MPa, roofing and light profiles; 0.40–3.0 mm stock.من المخزونS280GD galvanized steel (EN)EN 10346 S280GD+Z — the purlin grade, yield ≥ 280 MPa, 1.5–3.0 mm stock, Z275.من المخزونS320GD galvanized steel (EN)EN 10346 S320GD+Z — structural galvanized strip, yield ≥ 320 MPa, decking and profiles; 0.60–3.0 mm to order.من المخزونS350GD galvanized steel (EN)EN 10346 S350GD+Z — high-strength structural galvanized strip, yield ≥ 350 MPa, decking, long-span purlins, solar; 0.60–3.0 mm stock.من المخزونPre-painted galvanized (PPGI) (EN)RAL colours, PE / PVDF, 0.30–1.20 mm.من المخزونRAL 9002 PPGI sheet (EN)The industrial standard off-white pre-painted coil and sheet, 0.35–1.2 mm — roofing, cladding, sandwich panels.من المخزونRAL 9010 PPGI sheet (EN)Bright pure-white pre-painted coil and sheet for retail, food, clean and cold-store buildings, 0.35–1.2 mm.من المخزونRAL 3009 PPGI sheet (EN)The classic brick/tile red pre-painted coil and sheet for roofing, tile-profile sheet and rural buildings, 0.35–0.70 mm.من المخزونRAL 7016 PPGI sheet (EN)The modern dark grey pre-painted coil and sheet for façades, roofs, fences and architectural cladding, 0.40–1.2 mm.من المخزونRAL 6005 PPGI sheet (EN)Dark green pre-painted coil and sheet for agricultural, forest-edge and landscape-sensitive roofs and fences, 0.40–0.70 mm.من المخزونRAL 1018 PPGI sheet (EN)Bright safety yellow pre-painted coil and sheet for guardrails, machine guards, signage and branded buildings, 0.50–1.2 mm.من المخزون

الستانلس ستيل

صاج وألواح 304 / 316 / 430، أنابيب وبروفيلات، مواسير، أنابيب وإكسسوارات الدرابزين.

Stainless sheet & plate 304 / 316 / 430 (EN)2B, BA, No.4, hairline; 0.40–30 mm.من المخزون304 stainless steel sheet (EN)AISI 304 / 1.4301 austenitic stainless sheet and plate 0.5–6 mm, 2B / BA / No.4, from stock.من المخزون304L stainless steel sheet (EN)Low-carbon AISI 304L / 1.4307 for welded tanks and vessels, 1–6 mm sheet and plate to 30 mm.من المخزون316 stainless steel sheet (EN)Molybdenum-alloyed AISI 316 / 1.4401 for coastal, marine and chemical service, 1–6 mm sheet from stock.من المخزون316L stainless steel sheet (EN)Low-carbon AISI 316L / 1.4404 for welded marine, chemical and pharma equipment, 1–6 mm sheet, plate to 30 mm.من المخزون430 stainless steel sheet (EN)Ferritic AISI 430 / 1.4016 — magnetic, nickel-free, economical stainless for appliances and decoration, 0.5–3 mm.من المخزون410 stainless steel sheet (EN)Martensitic AISI 410 / 1.4006 — hardenable 12 % Cr stainless for blades, wear parts and valves, 1–6 mm to order.من المخزونStainless tube & profile (EN)Round, square and rectangular, polished and mill finish.من المخزونStainless rectangular tube (EN)Welded 304 / 316 rectangular hollow section 20×10–150×50 mm, 1–3 mm, satin or 2B, for frames, rails and architecture.من المخزونStainless pipe (EN)Welded and seamless EN 10217-7 / ASTM A312.من المخزون304 stainless steel pipe (EN)Welded 304 / 1.4301 round tube and pipe Ø 12–219 mm, 1–4 mm, satin or 2B, from stock; ornamental and mechanical.من المخزون316L stainless steel pipe (EN)Welded 316L / 1.4404 round tube and schedule pipe Ø 12–219 mm for marine, coastal, pool and chemical service.من المخزونSeamless stainless steel pipe (EN)Seamless 304L / 316L pipe to ASTM A312 / EN 10216-5, ½"–12", sch 10S–160, for pressure, high temperature and instrumentation.من المخزونSatin stainless steel tube (EN)Brushed 180–320 grit round, square and rectangular stainless tube for handrails, furniture and architecture, 304 / 316.من المخزونMirror stainless steel tube (EN)Mirror-polished (No. 8, BA-equivalent) round and square stainless tube in 304 / 316 for decorative, signage and luxury interiors.من المخزونFood grade stainless steel tube (EN)Sanitary / hygienic 304L and 316L tube to DIN 11850, ISO 2037, ASTM A270 — Ra ≤ 0.8 µm inside, for dairy, beverage, food and pharma lines.من المخزون

المقاطع والبروفيلات

HEA/HEB، IPE، UPN، زوايا، قضبان مسطحة، مقاطع مجوفة، مدادات C-Z، حواجز الطرق، زوايا مشقوقة.

مواسير مربعة ومستطيلة (بروفيل صندوقي)مواسير مربعة ومستطيلة (بوكس سكشن) من مصنعنا: EN 10219، 15×15–400×400 مم، أسود ومجلفن ومدهون.تصنيع في ديلوفاسيSquare hollow sections (EN)Square tube 15×15 to 250×250 mm, wall 1.2–10 mm, S235JRH / S355J2H, from our tube mill; kg/m table.من المخزونRectangular hollow sections (EN)Rectangular tube 10×20 to 200×300 mm, wall 1.2–10 mm, S235JRH / S355J2H, from our tube mill; kg/m table.من المخزونGalvanized square tube (EN)Pre-galvanized square hollow sections 20×20 to 100×100 mm from DX51D+Z275 strip, 1.35–3 mm; from our mill.من المخزونGalvanized rectangular tube (EN)Pre-galvanized rectangular hollow sections 20×30 to 50×100 mm from Z275 strip, 1.35–3 mm; from our mill.من المخزونCold-rolled (DKP) box sections (EN)Thin-wall box sections from DC01 cold-rolled strip, 10×10 to 90×90 mm, 0.7–2 mm, smooth surface for furniture and painting.من المخزونPre-painted box sections (EN)Box sections rolled from painted strip — RAL 9016 white, 7016 anthracite, 3009 red, 9005 black — 15×15 to 100×100 mm; from our mill.من المخزونThick-wall hollow sections (EN)Heavy box sections 5–10 mm wall, 100×100 to 250×250 / 200×300, S235JRH / S355J2H, for columns and heavy frames.من المخزونS355J2H hollow sections (EN)EN 10219 S355J2H (ST52) square and rectangular hollow sections — the structural grade, 40×40 to 250×250, 3–10 mm.من المخزونC and Z purlins (EN)Roll-formed galvanized purlins 100–350 mm, punched to drawing.تصنيع في ديلوفاسيC purlin (EN)Cold-formed lipped C (cee) purlins and girts, 100–300 mm, 1.5–3 mm, S280GD/S350GD Z275, punched to drawing.من المخزونZ purlin (EN)Cold-formed lipped Z (zed) purlins for continuous lapped or sleeved roof systems, 120–350 mm, 1.5–3 mm, Z275.من المخزونOmega, sigma and M light profiles (EN)Light-gauge steel framing profiles.تصنيع في ديلوفاسيOmega profile (EN)Galvanized omega (hat / top-hat) profiles 20–100 mm for cladding sub-frames, roof battens and solar rails, 0.5–2.5 mm.من المخزونM profile (EN)Galvanized M (furring / resilient) channels 15–40 mm for ceiling grids, wall lining and cladding furring, 0.5–1.2 mm.من المخزونجسور H (HEA / HEB)جسور حديد H من HEA وHEB وHEM 100–600 مم وفق EN 10365 بدرجات S235JR وS275JR وS355J2 من إسطنبول.من المخزونIPE beams (EN)European parallel-flange I-beams IPE 80–600, S275JR / S355J2, 6 and 12 m, kg/m table.من المخزونIPN beams (EN)Tapered-flange I-beams (NPI) IPN 80–600 for older designs; S235JR / S275JR, kg/m table.من المخزونHEA beams (EN)Light wide-flange H-beams HEA 100–1000 (IPBl), S275JR / S355J2, columns and beams, kg/m table.من المخزونHEB beams (EN)Standard wide-flange H-beams HEB 100–1000 (IPB), S275JR / S355J2, heavy columns, kg/m table.من المخزونChannels UPN / UPE (EN)EN 10365 channels 50–400 mm.من المخزونUPN channels (EN)Tapered-flange U-channels UPN 50–400 (NPU), S235JR, 6 and 12 m, kg/m table.من المخزونUPE channels (EN)Parallel-flange U-channels UPE 80–400, S235JR / S355J2, 6 and 12 m, kg/m table.من المخزونAngles, equal & unequal (EN)EN 10056 angles 20×20 to 200×200 mm.من المخزونEqual angles (EN)Hot-rolled equal-leg angles L 20×20 to 200×200, S235JR / S355J2, 6 and 12 m, kg/m table.من المخزونUnequal angles (EN)Hot-rolled unequal-leg angles 40×20 to 200×150, S235JR / S355J2, 6 and 12 m, kg/m table.من المخزونFlat bar (EN)Hot-rolled flat bar 20×3 to 200×20 (lama), S235JR / S355J2, 6 m, kg/m table, cut and drilled.من المخزونHighway guardrail W-beam (EN)EN 1317 / AASHTO galvanized guardrail with posts and fittings.من المخزونSlotted angle (EN)Galvanized and painted slotted angle for racking.تصنيع في ديلوفاسيSteel grating (bar grating) (EN)Press-welded HDG bar grating 25×3–50×5, platforms cut to drawing, stair treads, drain covers.من المخزونOval & custom profiles (EN)Roll-formed special sections to drawing.تصنيع في ديلوفاسي

المواسير والأنابيب

ERW أسود ومجلفن، EN 10255 للماء والغاز، بدون درز EN 10216 / A106، أنابيب الغلايات.

أنابيب حديد أسود ERW (مواسير MS)مواسير حديد أسود ERW / MS من ½ إلى 12 بوصة، جدار 1.5–8 مم، EN 10219 / EN 10255 / ASTM A53.من المخزونDKP pipe (EN)Bright cold-rolled precision round tube Ø 8–76 mm, 0.6–2 mm, from DC01 strip — furniture, automotive, chrome plating.من المخزونمواسير مجلفنة (GI pipe)مواسير GI مجلفنة بالغمس الساخن من ½ إلى 8 بوصة من مصنعنا: EN 10255 متوسطة/ثقيلة، ASTM A53، زنك EN 10240 A1، مسننة مع جلبة.تصنيع في ديلوفاسيSeamless pipe EN 10216 / A106 (EN)Boiler and line pipe, P235GH, Grade B.من المخزونBoiler tube (EN)Seamless P235GH / P265GH / 16Mo3 tubes to EN 10216-2, ASTM A192 / A210 / A335, Ø 25–168 mm, for boilers, superheaters and heat exchangers.من المخزونST52 seamless pipe (EN)Seamless E355 / ST52 mechanical and hydraulic tube, Ø 20–406 mm, 3–40 mm wall, honed and cold-drawn options.من المخزونASTM A53 pipe (EN)A53 Grade B black and galvanized pipe, ERW (Type E) and seamless (Type S), ½"–24", sch 40 / 80, for US-spec projects.من المخزونSpiral welded pipe (EN)Large-diameter SAWH pipe 400–2500 mm for piling and water.من المخزون

الأسقف والكلادينج

ساندوتش بانل PIR/PUR/صوف صخري، صاج مضلع ومموج، صاج الأسقف الخرسانية، صاج القرميد، ستاندنغ سيم.

ساندوتش بانلساندوتش بانل PIR وPUR وصوف صخري وEPS للأسقف والجدران، 40–200 مم، EN 14509.تصنيع في ديلوفاسيRoof sandwich panel (EN)5-rib (trapezoidal) roof panels with PIR / PUR / rockwool core, 40–150 mm, overlap joint, slopes from 5 %.من المخزونWall sandwich panel (EN)Flat, micro-ribbed or lined wall panels with PIR / PUR / rockwool core 40–150 mm, tongue-and-groove joint, visible or hidden fix.من المخزونPIR sandwich panel (EN)Polyisocyanurate-core roof and wall panels — λ 0.022 W/mK, B-s1,d0, 40–200 mm — the best insulation per millimetre.من المخزونPUR sandwich panel (EN)Polyurethane-core roof and wall panels — λ 0.024 W/mK, 40–120 mm — the economy foam core for sheds, camps and unheated buildings.من المخزونEPS sandwich panel (EN)Expanded-polystyrene-core roof and wall panels 50–200 mm — the lowest-cost insulated panel for partitions, camps and mild climates.من المخزونRockwool sandwich panel (EN)Non-combustible mineral-wool-core roof and wall panels — A2-s1,d0, EI 30–120 fire walls, 50–200 mm, acoustic Rw 30–34 dB.من المخزونCold room panel (EN)PIR cold-store and freezer panels 80–200 mm with flat food-grade skins, cam-lock or tongue-and-groove joints, for 0 °C to −40 °C.من المخزونصاج أسقف ترابيزي ومموّجصاج أسقف ترابيزي ومموّج مشكّل في ديلوفاسي: 18/76، 27/150، 38/151، 45/333، مجلفن أو مدهون أو ألوزنك، 0.30–0.70 مم.تصنيع في ديلوفاسيCorrugated roofing sheet 18/76 (EN)Classic sinusoidal corrugated (sinus) galvanized and coloured roofing sheet, 18 mm × 76 mm wave, 0.40–0.70 mm.من المخزونTrapezoidal sheet 27/150 (EN)Light 27 mm trapezoidal profile (T27) for walls, roofs on close purlins and liner sheet — galvanized or coloured, 0.40–0.60 mm.من المخزونTrapezoidal sheet 38/151 (EN)The standard 38 mm roof profile (T38) for industrial roofs at 2–3 m purlin spacing — galvanized or coloured, 0.40–0.70 mm.من المخزونTrapezoidal sheet 45/333 (EN)Deep 45 mm three-rib profile for 3–4 m purlin spacing, long-span roofs and light decking — 0.50–1.0 mm.من المخزونGalvanized trapezoidal sheet (EN)Plain hot-dip galvanized (GI) trapezoidal roofing and cladding sheet in 27/150, 38/151 and 45/333, Z100–Z275, 0.40–0.70 mm.من المخزونPPGI trapezoidal sheet (EN)Colour-coated (pre-painted galvanized) trapezoidal roofing and cladding in 27/150, 38/151 and 45/333 — RAL colours, PE / SMP / PVDF, 0.40–0.70 mm.من المخزونComposite floor deck (EN)Deck profile for concrete slabs, 0.70–1.20 mm.تصنيع في ديلوفاسيTile-profile sheet (EN)Roll-formed metal roof tile in RAL colours.تصنيع في ديلوفاسيStanding seam roofing (EN)Snap-lock and mechanically seamed panels.تصنيع في ديلوفاسي