Stahlprodukte — sechs Familien, ein Lieferant

Jede Produktseite nennt Norm und Güte, den Abmessungsbereich ab Lager oder aus eigener Fertigung, eine Richtpreisspanne in USD aus unserer Wochenliste, Mindestmenge, Verpackung und die Dokumente für Ihren Markt. Eigene Fertigung ist gekennzeichnet.

Warmgewalzte Flachprodukte

Warmband & Blech, Bau- und Grobblech, Schiffbau, Druckbehälter, verschleißfest, Riffelblech, Corten.

Warmgewalztes Coil & BlechWarmgewalztes Coil, Blech und Grobblech S235JR–S355JR, schwarz oder gebeizt und geölt, 1,5–20 mm, Zuschnitt in Istanbul.Ab LagerGebeiztes und geöltes Warmband (HRPO)Warmgewalzt, gebeizt und geölt — zunderfreie Oberfläche zum Warmbandpreis, 1,35–6,0 mm, S235JR / DD11–DD14, Coil, Tafel, Spaltband.Ab LagerDD11 UmformstahlEN 10111 DD11 (1.0332, ex StW 22) — hot-rolled bending and forming sheet, 1.5–6 mm, black or pickled, from stock.Ab LagerDD12 forming steel (EN)EN 10111 DD12 (1.0398, ex StW 23) — hot-rolled drawing-quality sheet, yield 170–320 MPa, A80 ≥ 30 %; 1.5–6 mm to order.Ab LagerDD13 forming steel (EN)EN 10111 DD13 (1.0335, ex StW 24) — hot-rolled deep-drawing sheet, yield 170–310 MPa, A80 ≥ 33 %; 1.5–6 mm HRPO from stock.Ab LagerDD14 forming steel (EN)EN 10111 DD14 (1.0389, ex StW 24 special) — hot-rolled extra-deep-drawing sheet, yield 170–290 MPa, A80 ≥ 36 %; 1.5–6 mm to order.Ab LagerS235JR Stahlblech (Baustahl)EN 10025-2 structural plate, 3–100 mm, cut to size.Ab LagerST37 StahlblechST37-2 nach DIN 17100 — heute als S235JR (EN 10025-2) gewalzt und bescheinigt — 1,5–20 mm warmgewalzt ab Lager, zugeschnitten.Ab LagerS275JR plate (EN)EN 10025-2 structural plate for welded frames.Ab LagerST44 StahlblechDIN 17100 ST44-2 — certified as S275JR; 3–40 mm, the step between ST37 and ST52.Ab LagerS355JR / J0 / J2 plate (EN)Higher-strength structural plate with impact-tested variants.Ab LagerST52 StahlblechDIN 17100 ST52-3 — certified as S355J2 (or S355JR); 3–100 mm, the high-strength standard.Ab LagerS355JR StahlblechGrundgüte der S355-Familie, 355 MPa, 27 J bei +20 °C, 6–20 mm ab Lager, 3–100 mm auf Bestellung — das wirtschaftliche hochfeste Blech.Ab LagerS355J0 StahlblechEN 10025-2 S355J0 (1.0553), 27 J at 0 °C — the ST52-3 U grade; 5–80 mm to order.Ab LagerS355J2 StahlblechEN 10025-2 Baustahl 355 MPa, 27 J bei −20 °C, 6–30 mm ab Lager, 3–150 mm auf Bestellung — Nachfolger von ST52-3 N.Ab LagerS355J2+N StahlblechS355J2 delivered normalised — fine grain, uniform through thickness; 8–150 mm to order.Ab LagerS355K2 StahlblechEN 10025-2 S355K2 (1.0596), 40 J at −20 °C — for dynamic loads and cold regions; 8–100 mm to order.Ab LagerS355NL StahlblechEN 10025-3 S355NL (1.0546) — normalised fine-grain plate, 27 J at −50 °C; 8–100 mm imported to order.Ab LagerS355ML StahlblechEN 10025-4 S355ML (1.8834) — thermomechanical fine-grain plate, 27 J at −50 °C, low CEV; 6–80 mm to order.Ab LagerS355MC StahlThermomechanisch gewalzter Kaltumformstahl EN 10149-2 (ehem. QStE 380 TM), 355 MPa, Biegeradius 1 × t, Coil und Tafel 2–12 mm.Ab LagerS460MC steel (EN)EN 10149-2 S460MC (1.0982) — 460 MPa cold-forming strip, 2–12 mm to order.Ab LagerS500MC steel (EN)EN 10149-2 S500MC (1.0984) — 500 MPa cold-forming strip for tippers, booms and chassis, 2–12 mm.Ab LagerS700MC steel (EN)EN 10149-2 S700MC (1.8974) — 700 MPa ultra-high-strength cold-forming strip, 3–12 mm.Ab LagerWear-resistant plate AR400–AR500 (EN)Abrasion-resistant and S690QL high-yield plate.Ab LagerVerschleißblech 400 HB (AR400)Vergütetes Verschleißblech 400 HB (Hardox 400 / Dillidur 400 / XAR 400 Klasse) 6–40 mm — biegbar, schweißbar, Zuschnitt nach DXF.Ab LagerAR450 wear plate (EN)450 HB abrasion-resistant plate 6–30 mm — more wear life than AR400, still formable; the tipper-body grade.Ab LagerAR500 wear plate (EN)500 HB abrasion-resistant plate 6–40 mm for liners and fixed wear parts under severe sliding abrasion.Ab LagerS690QL StahlblechVergüteter hochfester Baustahl EN 10025-6, 690 MPa Streckgrenze, 30 J bei −40 °C, 6–60 mm — Strenx 700 / Weldox 700 / Dillimax 690 Klasse.Ab LagerHeavy plate & slab (EN)20–200 mm plate for machinery and shipbuilding bases.Ab LagerShipbuilding plate Grade A–AH36 (EN)Class-approved hull plate.Ab LagerGrade A ship plate (EN)Ordinary-strength shipbuilding plate, 235 MPa yield, class-certified (LR, BV, DNV, ABS, RINA, TL), 5–50 mm.Ab LagerGrade B ship plate (EN)Ordinary-strength hull plate with 27 J impact at 0 °C, for thicker shell and deck plates; class-certified, 6–50 mm.Ab LagerAH36 steel plate (EN)Higher-strength shipbuilding plate, 355 MPa yield, 34 J at 0 °C, class-certified, 6–60 mm.Ab LagerDH36 steel plate (EN)Higher-strength hull plate, 355 MPa yield with 34 J at −20 °C, for thick and critical plates; class-certified, 8–80 mm.Ab LagerEH36 steel plate (EN)Higher-strength hull plate, 355 MPa yield with 34 J at −40 °C, normalised or TM, for the most critical zones; 10–100 mm.Ab LagerPressure vessel plate P235GH–P355GH, 16Mo3 (EN)EN 10028-2 boiler and vessel plate.Ab LagerP235GH steel plate (EN)EN 10028-2 P235GH (1.0345) — low-pressure boiler and hot-water plate, 3–60 mm to order.Ab LagerP265GH KesselblechDruckbehälterstahl EN 10028-2 (ehem. H II), 265 MPa, Warmstreckgrenze bis 400 °C, 6–20 mm ab Lager, 3–100 mm auf Bestellung.Ab LagerP295GH steel plate (EN)EN 10028-2 P295GH (1.0481, ex 17Mn4) — 295 MPa pressure-vessel plate, 6–100 mm to order.Ab LagerP355GH steel plate (EN)EN 10028-2 P355GH (1.0473, ex 19Mn6) — the strongest GH boiler plate; 6–150 mm to order.Ab LagerP355NH steel plate (EN)EN 10028-3 P355NH (1.0565) — normalised fine-grain pressure-vessel plate, −20 °C; 6–100 mm to order.Ab Lager16Mo3 KesselblechWarmfester Molybdänstahl EN 10028-2 (ehem. 15Mo3), 275 MPa, bescheinigte Warmstreckgrenze und Zeitstandwerte bis 500 °C, 6–100 mm auf Bestellung.Ab LagerASTM A516 Grade 70 plate (EN)ASME SA-516 Gr. 70 pressure-vessel plate for U-stamp projects; Gr. 60 / 65 also; 6–100 mm to order.Ab LagerASTM A572 Grade 50 plate (EN)HSLA structural plate, 345 MPa (50 ksi) — the ASTM twin of S355; 6–100 mm to order.Ab LagerASTM A36 steel plate (EN)The ASTM carbon structural plate, 250 MPa (36 ksi) — S235JR/S275JR equivalent; 6–100 mm to order.Ab LagerCortenstahl S355J2WP (wetterfester Stahl)EN 10025-5 weathering plate and sheet for façades and structures.Ab LagerS355J2WP Cortenstahl-BlechWetterfester Baustahl EN 10025-5 (Corten A), 1–10 mm, laserzugeschnitten für Fassaden, Gartengestaltung und Kunst — bildet eine schützende Rostpatina.Ab LagerS355J0WP corten sheet (EN)EN 10025-5 weathering steel with 0 °C impact — the economical Corten A grade for cladding, landscaping and art, 1–10 mm.Ab LagerTränenblech (Riffelblech)Tear-drop and five-bar floor plate, 3–12 mm.Ab LagerPerforated & expanded metal (EN)Round, square and slotted perforations punched to order; expanded mesh.Hergestellt in Dilovası

Beschichtet & kaltgewalzt

Feuerverzinkt, bandbeschichtet, Aluzink, Zink-Magnesium, kaltgewalzt DC01–DC04, Spaltband.

DC01 KaltbandKaltgewalztes Feinblech EN 10130 DC01 (ehem. St 12), 0,40–3,0 mm als Coil, Tafel und Spaltband ab Lager — Biegegüte, geölt.Ab LagerDC03 KaltbandEN 10130 DC03 (1.0347) — drawing-quality cold-rolled sheet, yield ≤ 240 MPa, A80 ≥ 34 %, 0.50–3.0 mm to order.Ab LagerDC04 KaltbandEN 10130 DC04 (1.0338) — deep-drawing cold-rolled sheet, yield ≤ 210 MPa, A80 ≥ 38 %, r90 ≥ 1.6; 0.50–3.0 mm stock.Ab LagerDC05 cold-rolled steel (EN)EN 10130 DC05 (1.0312) — extra-deep-drawing sheet, yield ≤ 180 MPa, A80 ≥ 40 %, r90 ≥ 1.9; 0.50–2.5 mm to order.Ab LagerDC06 cold-rolled steel (EN)EN 10130 DC06 (1.0873) — interstitial-free super-deep-drawing sheet, r90 ≥ 2.1, no ageing; 0.50–2.0 mm to order.Ab LagerFeuerverzinktes Blech & Coil (DX51D)Verzinktes Blech, Coil und Spaltband DX51D, Zinkauflage Z100–Z275, 0,30–4,00 mm ab Lager.Ab LagerDX51D verzinktes BlechFeuerverzinkter Grundwerkstoff EN 10346 DX51D+Z, Z100–Z275, 0,30–4,0 mm als Coil, Tafel und Spaltband ab Lager.Ab LagerDX52D verzinktes StahlblechEN 10346 DX52D+Z — drawing grade with guaranteed yield 140–300 MPa, 0.40–3.0 mm to order.Ab LagerDX53D verzinktes StahlblechEN 10346 DX53D+Z — deep-drawing grade, yield 140–260 MPa, A80 ≥ 30 %, 0.40–2.0 mm to order.Ab LagerDX54D verzinktes StahlblechEN 10346 DX54D+Z — extra-deep-drawing grade, yield 120–220 MPa, A80 ≥ 36 %, r90 ≥ 1.6; 0.50–2.0 mm to order.Ab LagerS220GD galvanized steel (EN)EN 10346 S220GD+Z — structural galvanized grade, yield ≥ 220 MPa, for light profiles; 0.40–3.0 mm to order.Ab LagerS250GD galvanized steel (EN)EN 10346 S250GD+Z — structural galvanized strip, yield ≥ 250 MPa, roofing and light profiles; 0.40–3.0 mm stock.Ab LagerS280GD galvanized steel (EN)EN 10346 S280GD+Z — the purlin grade, yield ≥ 280 MPa, 1.5–3.0 mm stock, Z275.Ab LagerS320GD galvanized steel (EN)EN 10346 S320GD+Z — structural galvanized strip, yield ≥ 320 MPa, decking and profiles; 0.60–3.0 mm to order.Ab LagerS350GD verzinktes StahlbandEN 10346 S350GD+Z — high-strength structural galvanized strip, yield ≥ 350 MPa, decking, long-span purlins, solar; 0.60–3.0 mm stock.Ab LagerFarbbeschichtetes Blech (PPGI)RAL colours, PE / PVDF, 0.30–1.20 mm.Ab LagerRAL 9002 PPGI sheet (EN)The industrial standard off-white pre-painted coil and sheet, 0.35–1.2 mm — roofing, cladding, sandwich panels.Ab LagerRAL 9010 PPGI sheet (EN)Bright pure-white pre-painted coil and sheet for retail, food, clean and cold-store buildings, 0.35–1.2 mm.Ab LagerRAL 3009 PPGI sheet (EN)The classic brick/tile red pre-painted coil and sheet for roofing, tile-profile sheet and rural buildings, 0.35–0.70 mm.Ab LagerRAL 7016 PPGI sheet (EN)The modern dark grey pre-painted coil and sheet for façades, roofs, fences and architectural cladding, 0.40–1.2 mm.Ab LagerRAL 6005 PPGI sheet (EN)Dark green pre-painted coil and sheet for agricultural, forest-edge and landscape-sensitive roofs and fences, 0.40–0.70 mm.Ab LagerRAL 1018 PPGI sheet (EN)Bright safety yellow pre-painted coil and sheet for guardrails, machine guards, signage and branded buildings, 0.50–1.2 mm.Ab Lager

Edelstahl

Blech und Platten 304 / 316 / 430, Rohre und Profile, Geländerrohr und Fittings.

Edelstahlblech 1.4301 / 1.4404 / 1.40162B, BA, No.4, hairline; 0.40–30 mm.Ab Lager1.4301 Edelstahlblech (V2A / 304)Austenitisches Edelstahlblech 1.4301 / AISI 304 (V2A) 0,5–6 mm, 2B / BA / geschliffen, ab Lager, zugeschnitten und folienbeschichtet.Ab Lager1.4307 Edelstahlblech (304L)Low-carbon AISI 304L / 1.4307 for welded tanks and vessels, 1–6 mm sheet and plate to 30 mm.Ab Lager1.4401 Edelstahlblech (V4A / 316)Molybdänlegiertes Edelstahlblech 1.4401 / AISI 316 (V4A) für Küste, Marine, Schwimmbad und Chemie — 1–6 mm ab Lager.Ab Lager1.4404 Edelstahlblech (V4A / 316L)Kohlenstoffarmer Molybdän-Austenit 1.4404 / AISI 316L (V4A) für geschweißte Tanks, Apparate und Pharmaanlagen — 1–6 mm ab Lager, Grobblech bis 30 mm.Ab Lager1.4016 Edelstahlblech (430)Ferritic AISI 430 / 1.4016 — magnetic, nickel-free, economical stainless for appliances and decoration, 0.5–3 mm.Ab Lager1.4006 Edelstahlblech (410)Martensitic AISI 410 / 1.4006 — hardenable 12 % Cr stainless for blades, wear parts and valves, 1–6 mm to order.Ab LagerStainless tube & profile (EN)Round, square and rectangular, polished and mill finish.Ab LagerStainless rectangular tube (EN)Welded 304 / 316 rectangular hollow section 20×10–150×50 mm, 1–3 mm, satin or 2B, for frames, rails and architecture.Ab LagerStainless pipe (EN)Welded and seamless EN 10217-7 / ASTM A312.Ab LagerEdelstahlrohr 1.4301 (304)Welded 304 / 1.4301 round tube and pipe Ø 12–219 mm, 1–4 mm, satin or 2B, from stock; ornamental and mechanical.Ab LagerEdelstahlrohr 1.4404 (316L)Welded 316L / 1.4404 round tube and schedule pipe Ø 12–219 mm for marine, coastal, pool and chemical service.Ab LagerSeamless stainless steel pipe (EN)Seamless 304L / 316L pipe to ASTM A312 / EN 10216-5, ½"–12", sch 10S–160, for pressure, high temperature and instrumentation.Ab LagerSatin stainless steel tube (EN)Brushed 180–320 grit round, square and rectangular stainless tube for handrails, furniture and architecture, 304 / 316.Ab LagerMirror stainless steel tube (EN)Mirror-polished (No. 8, BA-equivalent) round and square stainless tube in 304 / 316 for decorative, signage and luxury interiors.Ab LagerFood grade stainless steel tube (EN)Sanitary / hygienic 304L and 316L tube to DIN 11850, ISO 2037, ASTM A270 — Ra ≤ 0.8 µm inside, for dairy, beverage, food and pharma lines.Ab Lager

Profile & Träger

HEA/HEB, IPE, UPN, Winkel, Flachstahl, Hohlprofile, C-/Z-Pfetten, Leitplanken, Lochwinkel.

Hohlprofile quadratisch / rechteckigQuadrat- und Rechteckrohre (Hohlprofile) aus eigenem Rohrwerk: EN 10219, 15×15–400×400 mm, schwarz, verzinkt, lackiert.Hergestellt in DilovasıQuadratrohr (Vierkantrohr)Square tube 15×15 to 250×250 mm, wall 1.2–10 mm, S235JRH / S355J2H, from our tube mill; kg/m table.Ab LagerRechteckrohrRectangular tube 10×20 to 200×300 mm, wall 1.2–10 mm, S235JRH / S355J2H, from our tube mill; kg/m table.Ab LagerVerzinktes QuadratrohrPre-galvanized square hollow sections 20×20 to 100×100 mm from DX51D+Z275 strip, 1.35–3 mm; from our mill.Ab LagerVerzinktes RechteckrohrPre-galvanized rectangular hollow sections 20×30 to 50×100 mm from Z275 strip, 1.35–3 mm; from our mill.Ab LagerKaltgewalzte (DKP) KastenprofileThin-wall box sections from DC01 cold-rolled strip, 10×10 to 90×90 mm, 0.7–2 mm, smooth surface for furniture and painting.Ab LagerPre-painted box sections (EN)Box sections rolled from painted strip — RAL 9016 white, 7016 anthracite, 3009 red, 9005 black — 15×15 to 100×100 mm; from our mill.Ab LagerDickwandige HohlprofileHeavy box sections 5–10 mm wall, 100×100 to 250×250 / 200×300, S235JRH / S355J2H, for columns and heavy frames.Ab LagerS355J2H HohlprofileEN 10219 S355J2H (ST52) square and rectangular hollow sections — the structural grade, 40×40 to 250×250, 3–10 mm.Ab LagerC and Z purlins (EN)Roll-formed galvanized purlins 100–350 mm, punched to drawing.Hergestellt in DilovasıC-PfetteCold-formed lipped C (cee) purlins and girts, 100–300 mm, 1.5–3 mm, S280GD/S350GD Z275, punched to drawing.Ab LagerZ-PfetteCold-formed lipped Z (zed) purlins for continuous lapped or sleeved roof systems, 120–350 mm, 1.5–3 mm, Z275.Ab LagerOmega, sigma and M light profiles (EN)Light-gauge steel framing profiles.Hergestellt in DilovasıOmega profile (EN)Galvanized omega (hat / top-hat) profiles 20–100 mm for cladding sub-frames, roof battens and solar rails, 0.5–2.5 mm.Ab LagerM profile (EN)Galvanized M (furring / resilient) channels 15–40 mm for ceiling grids, wall lining and cladding furring, 0.5–1.2 mm.Ab LagerHEA / HEB TrägerBreitflanschträger HEA / HEB / HEM 100–600 mm nach EN 10365 in S235JR, S275JR, S355J2 ab Istanbul.Ab LagerIPE-TrägerEuropean parallel-flange I-beams IPE 80–600, S275JR / S355J2, 6 and 12 m, kg/m table.Ab LagerIPN-TrägerTapered-flange I-beams (NPI) IPN 80–600 for older designs; S235JR / S275JR, kg/m table.Ab LagerHEA-TrägerLight wide-flange H-beams HEA 100–1000 (IPBl), S275JR / S355J2, columns and beams, kg/m table.Ab LagerHEB-TrägerStandard wide-flange H-beams HEB 100–1000 (IPB), S275JR / S355J2, heavy columns, kg/m table.Ab LagerChannels UPN / UPE (EN)EN 10365 channels 50–400 mm.Ab LagerUNP-Profile (U-Stahl)Tapered-flange U-channels UPN 50–400 (NPU), S235JR, 6 and 12 m, kg/m table.Ab LagerUPE-ProfileParallel-flange U-channels UPE 80–400, S235JR / S355J2, 6 and 12 m, kg/m table.Ab LagerAngles, equal & unequal (EN)EN 10056 angles 20×20 to 200×200 mm.Ab LagerGleichschenkliger WinkelstahlHot-rolled equal-leg angles L 20×20 to 200×200, S235JR / S355J2, 6 and 12 m, kg/m table.Ab LagerUngleichschenklige WinkelHot-rolled unequal-leg angles 40×20 to 200×150, S235JR / S355J2, 6 and 12 m, kg/m table.Ab LagerFlachstahlHot-rolled flat bar 20×3 to 200×20 (lama), S235JR / S355J2, 6 m, kg/m table, cut and drilled.Ab LagerHighway guardrail W-beam (EN)EN 1317 / AASHTO galvanized guardrail with posts and fittings.Ab LagerSlotted angle (EN)Galvanized and painted slotted angle for racking.Hergestellt in DilovasıSteel grating (bar grating) (EN)Press-welded HDG bar grating 25×3–50×5, platforms cut to drawing, stair treads, drain covers.Ab LagerOval & custom profiles (EN)Roll-formed special sections to drawing.Hergestellt in Dilovası

Rohre

ERW schwarz und verzinkt, EN 10255 Wasser/Gas, nahtlos EN 10216 / A106, Kesselrohr.

Geschweißtes Stahlrohr schwarz (ERW)Längsnahtgeschweißtes schwarzes Stahlrohr ½"–12", Wand 1,5–8 mm, EN 10219 / EN 10255 / ASTM A53.Ab LagerPräzisionsstahlrohr (DKP-Rohr)Blankes kaltgewalztes Präzisionsrundrohr Ø 8–76 mm, 0,6–2 mm, aus DC01-Band — Möbel, Automobil, Verchromen.Ab LagerVerzinktes Stahlrohr (Gewinderohr)Feuerverzinktes Gewinderohr ½"–8" aus eigenem Werk: EN 10255 mittel/schwer, ASTM A53, Zink EN 10240 A1, mit Gewinde und Muffe.Hergestellt in DilovasıNahtloses Rohr EN 10216 / A106Boiler and line pipe, P235GH, Grade B.Ab LagerKesselrohrSeamless P235GH / P265GH / 16Mo3 tubes to EN 10216-2, ASTM A192 / A210 / A335, Ø 25–168 mm, for boilers, superheaters and heat exchangers.Ab LagerST52 nahtloses Rohr (E355)Seamless E355 / ST52 mechanical and hydraulic tube, Ø 20–406 mm, 3–40 mm wall, honed and cold-drawn options.Ab LagerASTM-A53-RohrA53 Grade B black and galvanized pipe, ERW (Type E) and seamless (Type S), ½"–24", sch 40 / 80, for US-spec projects.Ab LagerSpiral welded pipe (EN)Large-diameter SAWH pipe 400–2500 mm for piling and water.Ab Lager

Dach & Fassade

Sandwichpaneele PIR/PUR/Steinwolle, Trapez- und Wellblech, Verbunddecke, Pfannenblech, Stehfalz.

SandwichpaneeleSandwichpaneele mit PIR-, PUR-, Mineralwolle- und EPS-Kern für Dach und Wand, 40–200 mm, EN 14509.Hergestellt in DilovasıDach-Sandwichpaneel5-Rippen-Dachpaneele (Trapez-Außendeckschicht) mit PIR- / PUR- / Steinwollkern, 40–150 mm, Überlappungsstoß, Dachneigung ab 5 %.Ab LagerWand-SandwichpaneelGlatte, mikroprofilierte oder linierte Wandpaneele mit PIR- / PUR- / Steinwollkern 40–150 mm, Nut-und-Feder-Stoß, sichtbare oder verdeckte Befestigung.Ab LagerPIR-SandwichpaneelDach- und Wandpaneele mit Polyisocyanurat-Kern — λ 0,022 W/mK, B-s1,d0, 40–200 mm — die beste Dämmung je Millimeter.Ab LagerPUR-SandwichpaneelPolyurethane-core roof and wall panels — λ 0.024 W/mK, 40–120 mm — the economy foam core for sheds, camps and unheated buildings.Ab LagerEPS-SandwichpaneelExpanded-polystyrene-core roof and wall panels 50–200 mm — the lowest-cost insulated panel for partitions, camps and mild climates.Ab LagerSteinwolle-SandwichpaneelNon-combustible mineral-wool-core roof and wall panels — A2-s1,d0, EI 30–120 fire walls, 50–200 mm, acoustic Rw 30–34 dB.Ab LagerKühlraumpaneelPIR cold-store and freezer panels 80–200 mm with flat food-grade skins, cam-lock or tongue-and-groove joints, for 0 °C to −40 °C.Ab LagerTrapezblech & WellblechTrapez- und Wellblech aus Dilovası: 18/76, 27/150, 38/151, 45/333, verzinkt, bandbeschichtet oder Aluzink, 0,30–0,70 mm.Hergestellt in DilovasıWellblech 18/76Classic sinusoidal corrugated (sinus) galvanized and coloured roofing sheet, 18 mm × 76 mm wave, 0.40–0.70 mm.Ab LagerTrapezblech 27/150Light 27 mm trapezoidal profile (T27) for walls, roofs on close purlins and liner sheet — galvanized or coloured, 0.40–0.60 mm.Ab LagerTrapezblech 38/151The standard 38 mm roof profile (T38) for industrial roofs at 2–3 m purlin spacing — galvanized or coloured, 0.40–0.70 mm.Ab LagerTrapezblech 45/333Deep 45 mm three-rib profile for 3–4 m purlin spacing, long-span roofs and light decking — 0.50–1.0 mm.Ab LagerGalvanized trapezoidal sheet (EN)Plain hot-dip galvanized (GI) trapezoidal roofing and cladding sheet in 27/150, 38/151 and 45/333, Z100–Z275, 0.40–0.70 mm.Ab LagerPPGI trapezoidal sheet (EN)Colour-coated (pre-painted galvanized) trapezoidal roofing and cladding in 27/150, 38/151 and 45/333 — RAL colours, PE / SMP / PVDF, 0.40–0.70 mm.Ab LagerComposite floor deck (EN)Deck profile for concrete slabs, 0.70–1.20 mm.Hergestellt in DilovasıTile-profile sheet (EN)Roll-formed metal roof tile in RAL colours.Hergestellt in DilovasıStanding seam roofing (EN)Snap-lock and mechanically seamed panels.Hergestellt in Dilovası