Продукция — шесть групп, один поставщик

На каждой странице продукта: стандарт и марка, диапазон размеров со склада или собственного производства, ориентировочный диапазон цен в USD из еженедельного прайса, минимальный заказ, упаковка и документы для вашего рынка. Продукция собственного производства отмечена.

Горячекатаный прокат

Г/к рулон и лист, конструкционный и толстый лист, судосталь, котельная, износостойкая, рифлёный, кортен.

Горячекатаный рулон и листГорячекатаный рулон, лист и плита S235JR–S355JR (Ст3–09Г2С), чёрный или травленый промасленный, 1,5–20 мм, резка в размер в Стамбуле.Со складаHRPO pickled and oiled steel (EN)Hot-rolled pickled & oiled (HRP) coil and sheet 1.35–6.0 mm, S235JR / DD11 substrate, scale-free for forming and painting; from stock.Со складаDD11 forming steel (EN)EN 10111 DD11 (1.0332, ex StW 22) — hot-rolled bending and forming sheet, 1.5–6 mm, black or pickled, from stock.Со складаDD12 forming steel (EN)EN 10111 DD12 (1.0398, ex StW 23) — hot-rolled drawing-quality sheet, yield 170–320 MPa, A80 ≥ 30 %; 1.5–6 mm to order.Со складаDD13 forming steel (EN)EN 10111 DD13 (1.0335, ex StW 24) — hot-rolled deep-drawing sheet, yield 170–310 MPa, A80 ≥ 33 %; 1.5–6 mm HRPO from stock.Со складаDD14 forming steel (EN)EN 10111 DD14 (1.0389, ex StW 24 special) — hot-rolled extra-deep-drawing sheet, yield 170–290 MPa, A80 ≥ 36 %; 1.5–6 mm to order.Со складаS235JR plate (EN)EN 10025-2 structural plate, 3–100 mm, cut to size.Со складаST37 steel plate (EN)DIN 17100 ST37-2 — today certified as S235JR; 1.5–20 mm from stock.Со складаS275JR plate (EN)EN 10025-2 structural plate for welded frames.Со складаST44 steel plate (EN)DIN 17100 ST44-2 — certified as S275JR; 3–40 mm, the step between ST37 and ST52.Со складаS355JR / J0 / J2 plate (EN)Higher-strength structural plate with impact-tested variants.Со складаST52 steel plate (EN)DIN 17100 ST52-3 — certified as S355J2 (or S355JR); 3–100 mm, the high-strength standard.Со складаS355JR steel plate (EN)EN 10025-2 S355JR (1.0045), 355 MPa, +20 °C impact; 6–20 mm stock.Со складаS355J0 steel plate (EN)EN 10025-2 S355J0 (1.0553), 27 J at 0 °C — the ST52-3 U grade; 5–80 mm to order.Со складаS355J2 steel plate (EN)EN 10025-2 S355J2 (1.0577), −20 °C impact, fully killed — the ST52-3 N grade; 6–30 mm stock, 3–150 mm to order.Со складаS355J2+N steel plate (EN)S355J2 delivered normalised — fine grain, uniform through thickness; 8–150 mm to order.Со складаS355K2 steel plate (EN)EN 10025-2 S355K2 (1.0596), 40 J at −20 °C — for dynamic loads and cold regions; 8–100 mm to order.Со складаS355NL steel plate (EN)EN 10025-3 S355NL (1.0546) — normalised fine-grain plate, 27 J at −50 °C; 8–100 mm imported to order.Со складаS355ML steel plate (EN)EN 10025-4 S355ML (1.8834) — thermomechanical fine-grain plate, 27 J at −50 °C, low CEV; 6–80 mm to order.Со складаS355MC steel (EN)EN 10149-2 S355MC (1.0976) — thermomechanical cold-forming coil and sheet, 2–12 mm.Со складаS460MC steel (EN)EN 10149-2 S460MC (1.0982) — 460 MPa cold-forming strip, 2–12 mm to order.Со складаS500MC steel (EN)EN 10149-2 S500MC (1.0984) — 500 MPa cold-forming strip for tippers, booms and chassis, 2–12 mm.Со складаS700MC steel (EN)EN 10149-2 S700MC (1.8974) — 700 MPa ultra-high-strength cold-forming strip, 3–12 mm.Со складаWear-resistant plate AR400–AR500 (EN)Abrasion-resistant and S690QL high-yield plate.Со складаAR400 wear plate (EN)400 HB abrasion-resistant plate 6–40 mm — the bendable, weldable all-rounder for buckets, chutes and liners.Со складаAR450 wear plate (EN)450 HB abrasion-resistant plate 6–30 mm — more wear life than AR400, still formable; the tipper-body grade.Со складаAR500 wear plate (EN)500 HB abrasion-resistant plate 6–40 mm for liners and fixed wear parts under severe sliding abrasion.Со складаS690QL steel plate (EN)EN 10025-6 quenched and tempered high-strength structural plate, 690 MPa yield, 6–60 mm, −40 °C impact.Со складаHeavy plate & slab (EN)20–200 mm plate for machinery and shipbuilding bases.Со складаShipbuilding plate Grade A–AH36 (EN)Class-approved hull plate.Со складаGrade A ship plate (EN)Ordinary-strength shipbuilding plate, 235 MPa yield, class-certified (LR, BV, DNV, ABS, RINA, TL), 5–50 mm.Со складаGrade B ship plate (EN)Ordinary-strength hull plate with 27 J impact at 0 °C, for thicker shell and deck plates; class-certified, 6–50 mm.Со складаAH36 steel plate (EN)Higher-strength shipbuilding plate, 355 MPa yield, 34 J at 0 °C, class-certified, 6–60 mm.Со складаDH36 steel plate (EN)Higher-strength hull plate, 355 MPa yield with 34 J at −20 °C, for thick and critical plates; class-certified, 8–80 mm.Со складаEH36 steel plate (EN)Higher-strength hull plate, 355 MPa yield with 34 J at −40 °C, normalised or TM, for the most critical zones; 10–100 mm.Со складаPressure vessel plate P235GH–P355GH, 16Mo3 (EN)EN 10028-2 boiler and vessel plate.Со складаP235GH steel plate (EN)EN 10028-2 P235GH (1.0345) — low-pressure boiler and hot-water plate, 3–60 mm to order.Со складаP265GH steel plate (EN)EN 10028-2 P265GH (1.0425) — the standard boiler and pressure-vessel plate; 6–20 mm limited stock, 3–100 mm to order.Со складаP295GH steel plate (EN)EN 10028-2 P295GH (1.0481, ex 17Mn4) — 295 MPa pressure-vessel plate, 6–100 mm to order.Со складаP355GH steel plate (EN)EN 10028-2 P355GH (1.0473, ex 19Mn6) — the strongest GH boiler plate; 6–150 mm to order.Со складаP355NH steel plate (EN)EN 10028-3 P355NH (1.0565) — normalised fine-grain pressure-vessel plate, −20 °C; 6–100 mm to order.Со склада16Mo3 steel plate (EN)EN 10028-2 16Mo3 (1.5415, ex 15Mo3) — 0.3 % Mo creep-resisting boiler plate to 500 °C; 6–100 mm imported to order.Со складаASTM A516 Grade 70 plate (EN)ASME SA-516 Gr. 70 pressure-vessel plate for U-stamp projects; Gr. 60 / 65 also; 6–100 mm to order.Со складаASTM A572 Grade 50 plate (EN)HSLA structural plate, 345 MPa (50 ksi) — the ASTM twin of S355; 6–100 mm to order.Со складаASTM A36 steel plate (EN)The ASTM carbon structural plate, 250 MPa (36 ksi) — S235JR/S275JR equivalent; 6–100 mm to order.Со складаCorten weathering steel S355J2WP (EN)EN 10025-5 weathering plate and sheet for façades and structures.Со складаS355J2WP corten sheet (EN)EN 10025-5 phosphorus-alloyed weathering steel (Corten A class), 1–10 mm sheet for façades, art and landscaping.Со складаS355J0WP corten sheet (EN)EN 10025-5 weathering steel with 0 °C impact — the economical Corten A grade for cladding, landscaping and art, 1–10 mm.Со складаCheckered plate (EN)Tear-drop and five-bar floor plate, 3–12 mm.Со складаPerforated & expanded metal (EN)Round, square and slotted perforations punched to order; expanded mesh.Собственное производство, Диловасы

С покрытием и холоднокатаный

Оцинкованный, с полимерным покрытием, алюцинк, цинк-магний, х/к DC01–DC04, штрипс.

DC01 cold-rolled steel (EN)EN 10130 DC01 (1.0330) — the standard cold-rolled (DKP) sheet, 0.40–3.0 mm, from stock.Со складаDC03 cold-rolled steel (EN)EN 10130 DC03 (1.0347) — drawing-quality cold-rolled sheet, yield ≤ 240 MPa, A80 ≥ 34 %, 0.50–3.0 mm to order.Со складаDC04 cold-rolled steel (EN)EN 10130 DC04 (1.0338) — deep-drawing cold-rolled sheet, yield ≤ 210 MPa, A80 ≥ 38 %, r90 ≥ 1.6; 0.50–3.0 mm stock.Со складаDC05 cold-rolled steel (EN)EN 10130 DC05 (1.0312) — extra-deep-drawing sheet, yield ≤ 180 MPa, A80 ≥ 40 %, r90 ≥ 1.9; 0.50–2.5 mm to order.Со складаDC06 cold-rolled steel (EN)EN 10130 DC06 (1.0873) — interstitial-free super-deep-drawing sheet, r90 ≥ 2.1, no ageing; 0.50–2.0 mm to order.Со складаОцинкованный лист и рулон (горячего цинкования)Оцинкованный лист, рулон и штрипс DX51D, цинк Z100–Z275, 0,30–4,00 мм со склада.Со складаDX51D galvanized steel (EN)EN 10346 DX51D+Z — the standard hot-dip galvanized bending grade, 0.30–4.0 mm, Z100–Z275, from stock.Со складаDX52D galvanized steel (EN)EN 10346 DX52D+Z — drawing grade with guaranteed yield 140–300 MPa, 0.40–3.0 mm to order.Со складаDX53D galvanized steel (EN)EN 10346 DX53D+Z — deep-drawing grade, yield 140–260 MPa, A80 ≥ 30 %, 0.40–2.0 mm to order.Со складаDX54D galvanized steel (EN)EN 10346 DX54D+Z — extra-deep-drawing grade, yield 120–220 MPa, A80 ≥ 36 %, r90 ≥ 1.6; 0.50–2.0 mm to order.Со складаS220GD galvanized steel (EN)EN 10346 S220GD+Z — structural galvanized grade, yield ≥ 220 MPa, for light profiles; 0.40–3.0 mm to order.Со складаS250GD galvanized steel (EN)EN 10346 S250GD+Z — structural galvanized strip, yield ≥ 250 MPa, roofing and light profiles; 0.40–3.0 mm stock.Со складаS280GD galvanized steel (EN)EN 10346 S280GD+Z — the purlin grade, yield ≥ 280 MPa, 1.5–3.0 mm stock, Z275.Со складаS320GD galvanized steel (EN)EN 10346 S320GD+Z — structural galvanized strip, yield ≥ 320 MPa, decking and profiles; 0.60–3.0 mm to order.Со складаS350GD galvanized steel (EN)EN 10346 S350GD+Z — high-strength structural galvanized strip, yield ≥ 350 MPa, decking, long-span purlins, solar; 0.60–3.0 mm stock.Со складаPre-painted galvanized (PPGI) (EN)RAL colours, PE / PVDF, 0.30–1.20 mm.Со складаRAL 9002 PPGI sheet (EN)The industrial standard off-white pre-painted coil and sheet, 0.35–1.2 mm — roofing, cladding, sandwich panels.Со складаRAL 9010 PPGI sheet (EN)Bright pure-white pre-painted coil and sheet for retail, food, clean and cold-store buildings, 0.35–1.2 mm.Со складаRAL 3009 PPGI sheet (EN)The classic brick/tile red pre-painted coil and sheet for roofing, tile-profile sheet and rural buildings, 0.35–0.70 mm.Со складаRAL 7016 PPGI sheet (EN)The modern dark grey pre-painted coil and sheet for façades, roofs, fences and architectural cladding, 0.40–1.2 mm.Со складаRAL 6005 PPGI sheet (EN)Dark green pre-painted coil and sheet for agricultural, forest-edge and landscape-sensitive roofs and fences, 0.40–0.70 mm.Со складаRAL 1018 PPGI sheet (EN)Bright safety yellow pre-painted coil and sheet for guardrails, machine guards, signage and branded buildings, 0.50–1.2 mm.Со склада

Нержавеющая сталь

Лист и плита 304 / 316 / 430, трубы и профили, перильные трубы и фитинги.

Stainless sheet & plate 304 / 316 / 430 (EN)2B, BA, No.4, hairline; 0.40–30 mm.Со склада304 stainless steel sheet (EN)AISI 304 / 1.4301 austenitic stainless sheet and plate 0.5–6 mm, 2B / BA / No.4, from stock.Со склада304L stainless steel sheet (EN)Low-carbon AISI 304L / 1.4307 for welded tanks and vessels, 1–6 mm sheet and plate to 30 mm.Со склада316 stainless steel sheet (EN)Molybdenum-alloyed AISI 316 / 1.4401 for coastal, marine and chemical service, 1–6 mm sheet from stock.Со склада316L stainless steel sheet (EN)Low-carbon AISI 316L / 1.4404 for welded marine, chemical and pharma equipment, 1–6 mm sheet, plate to 30 mm.Со склада430 stainless steel sheet (EN)Ferritic AISI 430 / 1.4016 — magnetic, nickel-free, economical stainless for appliances and decoration, 0.5–3 mm.Со склада410 stainless steel sheet (EN)Martensitic AISI 410 / 1.4006 — hardenable 12 % Cr stainless for blades, wear parts and valves, 1–6 mm to order.Со складаStainless tube & profile (EN)Round, square and rectangular, polished and mill finish.Со складаStainless rectangular tube (EN)Welded 304 / 316 rectangular hollow section 20×10–150×50 mm, 1–3 mm, satin or 2B, for frames, rails and architecture.Со складаStainless pipe (EN)Welded and seamless EN 10217-7 / ASTM A312.Со склада304 stainless steel pipe (EN)Welded 304 / 1.4301 round tube and pipe Ø 12–219 mm, 1–4 mm, satin or 2B, from stock; ornamental and mechanical.Со склада316L stainless steel pipe (EN)Welded 316L / 1.4404 round tube and schedule pipe Ø 12–219 mm for marine, coastal, pool and chemical service.Со складаSeamless stainless steel pipe (EN)Seamless 304L / 316L pipe to ASTM A312 / EN 10216-5, ½"–12", sch 10S–160, for pressure, high temperature and instrumentation.Со складаSatin stainless steel tube (EN)Brushed 180–320 grit round, square and rectangular stainless tube for handrails, furniture and architecture, 304 / 316.Со складаMirror stainless steel tube (EN)Mirror-polished (No. 8, BA-equivalent) round and square stainless tube in 304 / 316 for decorative, signage and luxury interiors.Со складаFood grade stainless steel tube (EN)Sanitary / hygienic 304L and 316L tube to DIN 11850, ISO 2037, ASTM A270 — Ra ≤ 0.8 µm inside, for dairy, beverage, food and pharma lines.Со склада

Профили и балки

HEA/HEB, IPE, UPN (швеллер), уголок, полоса, профильные трубы, прогоны C/Z, барьерное ограждение, перфорированный уголок.

Профильная труба квадратная и прямоугольнаяПрофильная труба (квадратная, прямоугольная) с собственного трубного стана: EN 10219, 15×15–400×400 мм, чёрная, оцинкованная, окрашенная.Собственное производство, ДиловасыSquare hollow sections (EN)Square tube 15×15 to 250×250 mm, wall 1.2–10 mm, S235JRH / S355J2H, from our tube mill; kg/m table.Со складаRectangular hollow sections (EN)Rectangular tube 10×20 to 200×300 mm, wall 1.2–10 mm, S235JRH / S355J2H, from our tube mill; kg/m table.Со складаGalvanized square tube (EN)Pre-galvanized square hollow sections 20×20 to 100×100 mm from DX51D+Z275 strip, 1.35–3 mm; from our mill.Со складаGalvanized rectangular tube (EN)Pre-galvanized rectangular hollow sections 20×30 to 50×100 mm from Z275 strip, 1.35–3 mm; from our mill.Со складаCold-rolled (DKP) box sections (EN)Thin-wall box sections from DC01 cold-rolled strip, 10×10 to 90×90 mm, 0.7–2 mm, smooth surface for furniture and painting.Со складаPre-painted box sections (EN)Box sections rolled from painted strip — RAL 9016 white, 7016 anthracite, 3009 red, 9005 black — 15×15 to 100×100 mm; from our mill.Со складаThick-wall hollow sections (EN)Heavy box sections 5–10 mm wall, 100×100 to 250×250 / 200×300, S235JRH / S355J2H, for columns and heavy frames.Со складаS355J2H hollow sections (EN)EN 10219 S355J2H (ST52) square and rectangular hollow sections — the structural grade, 40×40 to 250×250, 3–10 mm.Со складаC and Z purlins (EN)Roll-formed galvanized purlins 100–350 mm, punched to drawing.Собственное производство, ДиловасыC purlin (EN)Cold-formed lipped C (cee) purlins and girts, 100–300 mm, 1.5–3 mm, S280GD/S350GD Z275, punched to drawing.Со складаZ purlin (EN)Cold-formed lipped Z (zed) purlins for continuous lapped or sleeved roof systems, 120–350 mm, 1.5–3 mm, Z275.Со складаOmega, sigma and M light profiles (EN)Light-gauge steel framing profiles.Собственное производство, ДиловасыOmega profile (EN)Galvanized omega (hat / top-hat) profiles 20–100 mm for cladding sub-frames, roof battens and solar rails, 0.5–2.5 mm.Со складаM profile (EN)Galvanized M (furring / resilient) channels 15–40 mm for ceiling grids, wall lining and cladding furring, 0.5–1.2 mm.Со складаДвутавр широкополочный HEA / HEBШирокополочные двутавры HEA / HEB / HEM 100–600 мм по EN 10365 в S235JR, S275JR, S355J2 (аналоги Ст3, 09Г2С) из Стамбула.Со складаIPE beams (EN)European parallel-flange I-beams IPE 80–600, S275JR / S355J2, 6 and 12 m, kg/m table.Со складаIPN beams (EN)Tapered-flange I-beams (NPI) IPN 80–600 for older designs; S235JR / S275JR, kg/m table.Со складаHEA beams (EN)Light wide-flange H-beams HEA 100–1000 (IPBl), S275JR / S355J2, columns and beams, kg/m table.Со складаHEB beams (EN)Standard wide-flange H-beams HEB 100–1000 (IPB), S275JR / S355J2, heavy columns, kg/m table.Со складаChannels UPN / UPE (EN)EN 10365 channels 50–400 mm.Со складаUPN channels (EN)Tapered-flange U-channels UPN 50–400 (NPU), S235JR, 6 and 12 m, kg/m table.Со складаUPE channels (EN)Parallel-flange U-channels UPE 80–400, S235JR / S355J2, 6 and 12 m, kg/m table.Со складаAngles, equal & unequal (EN)EN 10056 angles 20×20 to 200×200 mm.Со складаEqual angles (EN)Hot-rolled equal-leg angles L 20×20 to 200×200, S235JR / S355J2, 6 and 12 m, kg/m table.Со складаUnequal angles (EN)Hot-rolled unequal-leg angles 40×20 to 200×150, S235JR / S355J2, 6 and 12 m, kg/m table.Со складаFlat bar (EN)Hot-rolled flat bar 20×3 to 200×20 (lama), S235JR / S355J2, 6 m, kg/m table, cut and drilled.Со складаHighway guardrail W-beam (EN)EN 1317 / AASHTO galvanized guardrail with posts and fittings.Со складаSlotted angle (EN)Galvanized and painted slotted angle for racking.Собственное производство, ДиловасыSteel grating (bar grating) (EN)Press-welded HDG bar grating 25×3–50×5, platforms cut to drawing, stair treads, drain covers.Со складаOval & custom profiles (EN)Roll-formed special sections to drawing.Собственное производство, Диловасы

Трубы

Электросварные чёрные и оцинкованные, EN 10255 водогазопроводные, бесшовные EN 10216 / A106, котельные.

Труба электросварная чёрная (ЭСВ)Электросварная чёрная труба ½"–12", стенка 1,5–8 мм, EN 10219 / EN 10255 / ASTM A53, аналог ГОСТ 10704.Со складаDKP pipe (EN)Bright cold-rolled precision round tube Ø 8–76 mm, 0.6–2 mm, from DC01 strip — furniture, automotive, chrome plating.Со складаТруба оцинкованная (ВГП)Оцинкованная труба ½"–8" с собственного завода: EN 10255 (аналог ГОСТ 3262), ASTM A53, цинк EN 10240 A1, с резьбой и муфтой.Собственное производство, ДиловасыSeamless pipe EN 10216 / A106 (EN)Boiler and line pipe, P235GH, Grade B.Со складаBoiler tube (EN)Seamless P235GH / P265GH / 16Mo3 tubes to EN 10216-2, ASTM A192 / A210 / A335, Ø 25–168 mm, for boilers, superheaters and heat exchangers.Со складаST52 seamless pipe (EN)Seamless E355 / ST52 mechanical and hydraulic tube, Ø 20–406 mm, 3–40 mm wall, honed and cold-drawn options.Со складаASTM A53 pipe (EN)A53 Grade B black and galvanized pipe, ERW (Type E) and seamless (Type S), ½"–24", sch 40 / 80, for US-spec projects.Со складаSpiral welded pipe (EN)Large-diameter SAWH pipe 400–2500 mm for piling and water.Со склада

Кровля и фасад

Сэндвич-панели PIR/PUR/минвата, профнастил и волнистый лист, несъёмная опалубка, металлочерепица, фальц.

Сэндвич-панелиСэндвич-панели PIR, PUR, минвата и пенополистирол, кровельные и стеновые, 40–200 мм, EN 14509.Собственное производство, ДиловасыRoof sandwich panel (EN)5-rib (trapezoidal) roof panels with PIR / PUR / rockwool core, 40–150 mm, overlap joint, slopes from 5 %.Со складаWall sandwich panel (EN)Flat, micro-ribbed or lined wall panels with PIR / PUR / rockwool core 40–150 mm, tongue-and-groove joint, visible or hidden fix.Со складаPIR sandwich panel (EN)Polyisocyanurate-core roof and wall panels — λ 0.022 W/mK, B-s1,d0, 40–200 mm — the best insulation per millimetre.Со складаPUR sandwich panel (EN)Polyurethane-core roof and wall panels — λ 0.024 W/mK, 40–120 mm — the economy foam core for sheds, camps and unheated buildings.Со складаEPS sandwich panel (EN)Expanded-polystyrene-core roof and wall panels 50–200 mm — the lowest-cost insulated panel for partitions, camps and mild climates.Со складаRockwool sandwich panel (EN)Non-combustible mineral-wool-core roof and wall panels — A2-s1,d0, EI 30–120 fire walls, 50–200 mm, acoustic Rw 30–34 dB.Со складаCold room panel (EN)PIR cold-store and freezer panels 80–200 mm with flat food-grade skins, cam-lock or tongue-and-groove joints, for 0 °C to −40 °C.Со складаПрофнастил и гофролист кровельныйПрофнастил и гофролист с линий в Диловасы: 18/76, 27/150, 38/151, 45/333, оцинкованный, с полимерным покрытием или алюцинк, 0,30–0,70 мм.Собственное производство, ДиловасыCorrugated roofing sheet 18/76 (EN)Classic sinusoidal corrugated (sinus) galvanized and coloured roofing sheet, 18 mm × 76 mm wave, 0.40–0.70 mm.Со складаTrapezoidal sheet 27/150 (EN)Light 27 mm trapezoidal profile (T27) for walls, roofs on close purlins and liner sheet — galvanized or coloured, 0.40–0.60 mm.Со складаTrapezoidal sheet 38/151 (EN)The standard 38 mm roof profile (T38) for industrial roofs at 2–3 m purlin spacing — galvanized or coloured, 0.40–0.70 mm.Со складаTrapezoidal sheet 45/333 (EN)Deep 45 mm three-rib profile for 3–4 m purlin spacing, long-span roofs and light decking — 0.50–1.0 mm.Со складаGalvanized trapezoidal sheet (EN)Plain hot-dip galvanized (GI) trapezoidal roofing and cladding sheet in 27/150, 38/151 and 45/333, Z100–Z275, 0.40–0.70 mm.Со складаPPGI trapezoidal sheet (EN)Colour-coated (pre-painted galvanized) trapezoidal roofing and cladding in 27/150, 38/151 and 45/333 — RAL colours, PE / SMP / PVDF, 0.40–0.70 mm.Со складаComposite floor deck (EN)Deck profile for concrete slabs, 0.70–1.20 mm.Собственное производство, ДиловасыTile-profile sheet (EN)Roll-formed metal roof tile in RAL colours.Собственное производство, ДиловасыStanding seam roofing (EN)Snap-lock and mechanically seamed panels.Собственное производство, Диловасы