Кадыкёй, Стамбул · завод и склад Диловасы · офис в Лондоне +90 216 545 60 00 +44 7920 259866
Omega Steel Co.Поставщик металлопроката · Турция

Горячекатаный прокат

Г/к рулон и лист, конструкционный и толстый лист, судосталь, котельная, износостойкая, рифлёный, кортен.

Горячекатаный рулон и листГорячекатаный рулон, лист и плита S235JR–S355JR (Ст3–09Г2С), чёрный или травленый промасленный, 1,5–20 мм, резка в размер в Стамбуле.Со складаHRPO pickled and oiled steel (EN)Hot-rolled pickled & oiled (HRP) coil and sheet 1.35–6.0 mm, S235JR / DD11 substrate, scale-free for forming and painting; from stock.Со складаDD11 forming steel (EN)EN 10111 DD11 (1.0332, ex StW 22) — hot-rolled bending and forming sheet, 1.5–6 mm, black or pickled, from stock.Со складаDD12 forming steel (EN)EN 10111 DD12 (1.0398, ex StW 23) — hot-rolled drawing-quality sheet, yield 170–320 MPa, A80 ≥ 30 %; 1.5–6 mm to order.Со складаDD13 forming steel (EN)EN 10111 DD13 (1.0335, ex StW 24) — hot-rolled deep-drawing sheet, yield 170–310 MPa, A80 ≥ 33 %; 1.5–6 mm HRPO from stock.Со складаDD14 forming steel (EN)EN 10111 DD14 (1.0389, ex StW 24 special) — hot-rolled extra-deep-drawing sheet, yield 170–290 MPa, A80 ≥ 36 %; 1.5–6 mm to order.Со складаS235JR plate (EN)EN 10025-2 structural plate, 3–100 mm, cut to size.Со складаST37 steel plate (EN)DIN 17100 ST37-2 — today certified as S235JR; 1.5–20 mm from stock.Со складаS275JR plate (EN)EN 10025-2 structural plate for welded frames.Со складаST44 steel plate (EN)DIN 17100 ST44-2 — certified as S275JR; 3–40 mm, the step between ST37 and ST52.Со складаS355JR / J0 / J2 plate (EN)Higher-strength structural plate with impact-tested variants.Со складаST52 steel plate (EN)DIN 17100 ST52-3 — certified as S355J2 (or S355JR); 3–100 mm, the high-strength standard.Со складаS355JR steel plate (EN)EN 10025-2 S355JR (1.0045), 355 MPa, +20 °C impact; 6–20 mm stock.Со складаS355J0 steel plate (EN)EN 10025-2 S355J0 (1.0553), 27 J at 0 °C — the ST52-3 U grade; 5–80 mm to order.Со складаS355J2 steel plate (EN)EN 10025-2 S355J2 (1.0577), −20 °C impact, fully killed — the ST52-3 N grade; 6–30 mm stock, 3–150 mm to order.Со складаS355J2+N steel plate (EN)S355J2 delivered normalised — fine grain, uniform through thickness; 8–150 mm to order.Со складаS355K2 steel plate (EN)EN 10025-2 S355K2 (1.0596), 40 J at −20 °C — for dynamic loads and cold regions; 8–100 mm to order.Со складаS355NL steel plate (EN)EN 10025-3 S355NL (1.0546) — normalised fine-grain plate, 27 J at −50 °C; 8–100 mm imported to order.Со складаS355ML steel plate (EN)EN 10025-4 S355ML (1.8834) — thermomechanical fine-grain plate, 27 J at −50 °C, low CEV; 6–80 mm to order.Со складаS355MC steel (EN)EN 10149-2 S355MC (1.0976) — thermomechanical cold-forming coil and sheet, 2–12 mm.Со складаS460MC steel (EN)EN 10149-2 S460MC (1.0982) — 460 MPa cold-forming strip, 2–12 mm to order.Со складаS500MC steel (EN)EN 10149-2 S500MC (1.0984) — 500 MPa cold-forming strip for tippers, booms and chassis, 2–12 mm.Со складаS700MC steel (EN)EN 10149-2 S700MC (1.8974) — 700 MPa ultra-high-strength cold-forming strip, 3–12 mm.Со складаWear-resistant plate AR400–AR500 (EN)Abrasion-resistant and S690QL high-yield plate.Со складаAR400 wear plate (EN)400 HB abrasion-resistant plate 6–40 mm — the bendable, weldable all-rounder for buckets, chutes and liners.Со складаAR450 wear plate (EN)450 HB abrasion-resistant plate 6–30 mm — more wear life than AR400, still formable; the tipper-body grade.Со складаAR500 wear plate (EN)500 HB abrasion-resistant plate 6–40 mm for liners and fixed wear parts under severe sliding abrasion.Со складаS690QL steel plate (EN)EN 10025-6 quenched and tempered high-strength structural plate, 690 MPa yield, 6–60 mm, −40 °C impact.Со складаHeavy plate & slab (EN)20–200 mm plate for machinery and shipbuilding bases.Со складаShipbuilding plate Grade A–AH36 (EN)Class-approved hull plate.Со складаGrade A ship plate (EN)Ordinary-strength shipbuilding plate, 235 MPa yield, class-certified (LR, BV, DNV, ABS, RINA, TL), 5–50 mm.Со складаGrade B ship plate (EN)Ordinary-strength hull plate with 27 J impact at 0 °C, for thicker shell and deck plates; class-certified, 6–50 mm.Со складаAH36 steel plate (EN)Higher-strength shipbuilding plate, 355 MPa yield, 34 J at 0 °C, class-certified, 6–60 mm.Со складаDH36 steel plate (EN)Higher-strength hull plate, 355 MPa yield with 34 J at −20 °C, for thick and critical plates; class-certified, 8–80 mm.Со складаEH36 steel plate (EN)Higher-strength hull plate, 355 MPa yield with 34 J at −40 °C, normalised or TM, for the most critical zones; 10–100 mm.Со складаPressure vessel plate P235GH–P355GH, 16Mo3 (EN)EN 10028-2 boiler and vessel plate.Со складаP235GH steel plate (EN)EN 10028-2 P235GH (1.0345) — low-pressure boiler and hot-water plate, 3–60 mm to order.Со складаP265GH steel plate (EN)EN 10028-2 P265GH (1.0425) — the standard boiler and pressure-vessel plate; 6–20 mm limited stock, 3–100 mm to order.Со складаP295GH steel plate (EN)EN 10028-2 P295GH (1.0481, ex 17Mn4) — 295 MPa pressure-vessel plate, 6–100 mm to order.Со складаP355GH steel plate (EN)EN 10028-2 P355GH (1.0473, ex 19Mn6) — the strongest GH boiler plate; 6–150 mm to order.Со складаP355NH steel plate (EN)EN 10028-3 P355NH (1.0565) — normalised fine-grain pressure-vessel plate, −20 °C; 6–100 mm to order.Со склада16Mo3 steel plate (EN)EN 10028-2 16Mo3 (1.5415, ex 15Mo3) — 0.3 % Mo creep-resisting boiler plate to 500 °C; 6–100 mm imported to order.Со складаASTM A516 Grade 70 plate (EN)ASME SA-516 Gr. 70 pressure-vessel plate for U-stamp projects; Gr. 60 / 65 also; 6–100 mm to order.Со складаASTM A572 Grade 50 plate (EN)HSLA structural plate, 345 MPa (50 ksi) — the ASTM twin of S355; 6–100 mm to order.Со складаASTM A36 steel plate (EN)The ASTM carbon structural plate, 250 MPa (36 ksi) — S235JR/S275JR equivalent; 6–100 mm to order.Со складаCorten weathering steel S355J2WP (EN)EN 10025-5 weathering plate and sheet for façades and structures.Со складаS355J2WP corten sheet (EN)EN 10025-5 phosphorus-alloyed weathering steel (Corten A class), 1–10 mm sheet for façades, art and landscaping.Со складаS355J0WP corten sheet (EN)EN 10025-5 weathering steel with 0 °C impact — the economical Corten A grade for cladding, landscaping and art, 1–10 mm.Со складаCheckered plate (EN)Tear-drop and five-bar floor plate, 3–12 mm.Со складаPerforated & expanded metal (EN)Round, square and slotted perforations punched to order; expanded mesh.Собственное производство, Диловасы

Запросить цену на любой продукт этой группы →